Installing a bathtub without access from underneath can be difficult, but with the right approach, you can easily do this. First, turn off the water supply and remove the old tub if you need to replace the bathtub. This can be done by carefully disconnecting the plumbing and then removing the tub from its position. When dealing with a drop-in bathtub, you’ll place it into a pre-built frame, so you need to confirm the frame is strong and correctly sized for the new tub.
After removing the old bathtub in a house, clean the area thoroughly and check for any potential water damage or necessary repairs. Once the area is ready, set the new drop-in bathtub in place. Make sure it fits tightly and is level. Since you don’t have access from underneath, make sure all plumbing connections are made correctly from the sides.
Next, secure the bathtub in place by attaching it to the frame. Follow the manufacturer’s instructions closely if you are fitting a Jacuzzi bathtub, as these often have specific installation requirements due to the added weight and plumbing complexity. Make sure all the jets and electrical items are properly connected and sealed to prevent leaks.
Once everything is secured and in place, test the plumbing by turning the water supply back on and filling the tub. Check for leaks and confirm the water drains properly. By taking these steps, you can successfully install a new bathtub without accessing underneath, ensuring your bathtub in a house is ready for use.
